1. Before installing the track light, keep the wiring position, punch a mounting hole on the ceiling, insert the wire into the track light, wrap it with insulating tape, then fix the light fixture and track with screws and screws, and adjust the illumination direction of the light. After the installation is complete, you can turn on the track light to see the effect of the light.

2. The installation of the track spotlight includes the track, the lamp holder installed on the track, the lamp holder fixed on the lamp holder, the lamp holder installed inside the lamp holder, the two conductive plates inside the track and the elongated groove at the bottom of the track.

3. The top of the lamp holder is a top plate, and two protruding elastic terminals are set on the top of the top plate.

4. The top of the lamp holder is set in the guide rail, and the two elastic terminals of the top plate are in contact with the two conductor pieces in the guide rail. The lamp holder can be directly inserted into the guide rail, which can make the lamp holder move laterally and adjust the position of the light.

(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)